You want to change the language on your Jeep Cherokee’s console, but you don’t know how? And, without that, it’s difficult to adjust other dashboard settings, such as music, as well as understand notifications such as “low fuel level” or “engine problem”. Don’t worry, though; we’re here to assist you. We’ll start by explaining how to change your language. Then we’ll give you some tips on how to use your Jeep Cherokee’s dashboard applications.
What are the options for changing the language?
You can notice the miles and other readouts on your Jeep Wrangler’s speedo info center were all in Metric the other day when you look at your display. You can check the instructions and it says to use the menu feature, but if Jeep Wrangler Sport Unlimited doesn’t have one. Only a Step and a Reset button are available to me. The dealer advised me to bring it in so they could diagnose the problem with the help of the computer.
So, if you want to convert it from French to English, here’s how you may do it. On the steering wheel, press the VR button, and then say “on-ga-Lee” in your best French accent. After that, it will ask if you wish to switch to English! Pay attention to the instructions. Accept the invitation.
Jeep Cherokee dashboard language settings
It’s occasionally tough to complete the many setups on a Cherokee jeep if the language set isn’t yours. As a result, the first step should be to change the dashboard’s language. It’s easiest to achieve this by using icons and various keys, which are usually pretty intuitive. Otherwise, you can use your Jeep Cherokee to look for the correct language version of the interview guide. The languages are then generally found around the time setting in the setting component.
In most cases, this is a one-minute task. When you’re on the language preferences screen, select the option that best fits your needs from the drop-down menu.
On the jeep Cherokee, select the language for the voice command
It’s important to note that the voice command language adjusts to the console language set in the settings. As a result, if your console is in English, the voice commands will be in English as well. On the dashboard, there is no option to select two different languages.
It’s worth noting that not all of the on-board computer’s languages have voice control equivalents. As a result, if you select a language for which voice control is not available, it will be turned off automatically. If you select Russian on the dashboard but the voice command icon is missing, the voice command will be disabled.
Change the jeep Cherokee navigation language
If your Jeep Cherokee has a navigation system, it’s best if it’s set to your native tongue because otherwise it could be difficult to understand the directions. Now you know that, just like with voice control, the GPS system’s language will match the dashboard’s language settings. As a result, after you’ve chosen the language in the settings, it should apply to your Jeep Cherokee’s integrated GPS.
If your automobile did not come with a GPS, however, the change must be done at the GPS settings level. Because it isn’t connected to the vehicle’s on-board computer, you can have two different languages in this situation. Finally, if you are unable to alter the language, you may visit your dealer, although this will almost certainly be at your expense.
Selection of languages
To change the Uconnect Phone’s language, follow these steps:
- To begin, push the button.
- Say English, Espanol, or Francais after the “Ready” prompt and the subsequent beep.
- To finalize the language selection, continue following the system instructions. All prompts and voice instructions will be in that language when you select one of the languages.
How do I reset my Jeep Cherokee?
- Without starting the car, turn the ignition switch to “ON.”
- In a 10-second period, slowly press the gas pedal to the floor three times.
- Switch off the engine. Start the engine when 10 seconds have passed.
How to change language on jeep grand Cherokee 2011
You must press the MENU button with the ignition switched on. If you don’t see LANGUAGE on the first screen, hit the MENU button again until you do. To switch to a different language, use the STEP button. When you exit the menu, the last language you saw will be remembered. If that fails, try disconnecting the battery for a few minutes to reset the EVIC. If you still have the original radio, you’ll need to enter the radio code once the battery has been reset.
How to change language on jeep grand Cherokee 2012
- While turning the key to the on position, press and hold the SET button then release the SET button
- The display will adjust to show the languages that are now accessible. Toggle between languages by pressing and releasing the SELECT button.
- To select the language, press and hold the SET button for a few seconds.
How do I reset my Jeep ECM?
- Removing the positive battery cable will disconnect the battery.
- To clear the capacitors of any electric charge, ground the positive cable to the negative cable for 30 seconds.
- Reattach the battery’s positive cable.
- Turn the key to the on position but do not turn the engine on.
- The headlights should be switched on.
How do I reset my Jeep Uconnect?
Simultaneously press and hold the volume and the turning knob buttons. For 10-20 seconds, keep the knobs pressed down. Your vehicle’s brand name should show on the screen before going dark. The brand name will then appear again, and you will be taken back to the Uconnect® home page.