How to unlock steering wheel with dead battery

Lots of people discover themselves on the verge of their vehicle’s battery operating out and also they don’t really have a means to unlock their steering wheel using the keyless ignition or the remote control outside. All those who have the aid of their car owners or some other humans containing a vital can get into the automobile and look for a battery charger for your own vehicle. If you are lucky enough, then you are able to acquire a person that would help you in unlocking your steering wheel as well as start your auto within a very short time.

Test your car battery to make sure that it is the cause of your steering wheel lock up before you attempt to unlock it

The first thing you need to do is test your car battery. This will help you determine whether or not the problem is with your battery and not something else. If your car is old, it may be time for a new one anyway.

If your battery is good, then try to unlock it by pressing on the brake pedal and turning the key in the ignition at the same time. If this does not work, then try another key and see if it unlocks the steering wheel.

If that does not work either, then you need to call a tow truck or service station to help you out with this problem. If these things do not work, then there is a possibility that your car has an electrical problem with its ignition system.

Open the hood and attach the cables to your battery

• The positive cable will connect to the positive terminal, and the negative cable will connect to the negative terminal.
• Make sure that you connect them in this order, because if you do not, it could damage your car’s electrical system.
• Start your vehicle and let it run for at least five minutes. This will allow enough time for the alternator to charge your battery back up. P
• ut your car in park, then turn off all accessories in your car (such as headlights and radios).
• Remove both cables from their respective terminals, then close the hood again.

Locate the electronic module for the steering wheel lock mechanism     

It is located on the driver’s side of the vehicle, behind the glove box.

• Remove the cover over the electronic module. You may need to pry it off with a screwdriver or remove screws to do this.
• Press in on each tab on top of the electronic module, then pull up on it to remove it from its location.
• Remove two bolts that hold down the steering wheel locking mechanism. They are located on either side of where you removed your steering wheel locking mechanism earlier.
• Use a socket wrench to do this if necessary. Unplug any electrical connectors from your steering wheel locking mechanism so that you can remove it from your vehicle without damaging any wires or circuits inside your car’s electronics system.

Insert a sharp object into the hole

• Insert a sharp object into the hole in the steering wheel lock mechanism, and press the button when you feel it touch.
• If you have an electronic key fob, hold it near the lock and press the unlock button. If your car has an automatic door lock feature, push on the door handle until it clicks.
• If none of these options work, use a wire hanger to jimmy open your car’s window.
• Pry up on one corner of it and pull toward yourself, then do the same thing with another corner and pull again.
• Repeat this process until you’ve separated enough of the window to get your hand inside and reach over to unlock your car’s door.

Push in on the key

• Push in on the key while turning it to release pressure on the steering wheel lock mechanism, then remove the key. If your car has an automatic transmission, start the car and let it idle until it reaches normal operating temperature.
• Turn off all accessories, including lights and climate control systems. Set the parking brake and block the wheels.
• Start by disconnecting any wiring harnesses or electrical connections leading to the ignition cylinder or steering column.
• Remove any screws securing the steering wheel and pull it toward you to expose the lock mechanism underneath. The lock mechanism may be located on top of the steering column or underneath it depending on your vehicle’s make and model.
• Turn off your engine when you’re ready to begin removing your ignition cylinder. If you have a manual transmission, put your car in first gear while leaving your foot on the brake pedal. If you have an automatic transmission, put your car into Park before turning off your engine.
• Use a flathead screwdriver to pop out any clips holding in each wire connector inside of the ignition cylinder.
• Pull each wire out of its clip as far as possible without breaking them off at their base inside of the unit; this will make reconnecting them easier later on when installing new parts.

Conclusion

The basic rule of batteries is that when the power gets too low, the car will shut down automatically. So the fact that your car turned off means that you probably have a dead battery. However, there are other things that could cause this problem as well. To be sure and to prevent any further damage to your car, you should see a mechanic as soon as possible so they can get an official diagnosis and correctly correct the problem.