Wheel

How to disable steering wheel lock push to start

Jeep Meister
Advertisement

Pushing the button on the steering wheel has become a problem in some cars. If you have kids and they start playing with it – they could push it while you are driving, thus locking your steering wheel and making you unable to use it. This can cause an accident or a dangerous situation while driving. In this article I will explain how to disable or lock the push button so the button stays disabled until you unlock it.

Turn your car key to the on position and watch that your headlights are on

  1. Turn your car key to the on position and watch that your headlights are on. If your headlights are not on, turn them on.
  2. Using a flathead screwdriver, gently pry off the plastic cover over the steering wheel lock button. Remove the cover from the steering wheel and set it aside in a safe place where it won’t get lost or damaged.
  3. Use the Phillips head screwdriver to remove all four screws from the bottom of the steering wheel trim panel to reveal a set of wires underneath. Be careful not to damage any of these wires while removing them.
  4. Unplug one of the wires from underneath by pulling gently on it so that you can access its terminal connections after removing it completely from its plug-in connection point inside of the vehicle’s wiring harnesses.

Turn your car key off

  • Turn your car key off in the lock position and leave it there for about 5 minutes.
  • Open and close the driver’s door three times within 30 seconds.
  • Turn your car key to on, then off and then back on again within 10 seconds. This should reset your system.

Wait about 5 to 10 minutes, then start your car as usual

  1. Turn the ignition on and wait for the steering wheel lock to engage.
  2. Press and hold the brake pedal while turning off the engine.
  3. Turn the ignition back on and wait for the steering wheel lock to disengage.
  4. Start your vehicle as usual.

Turn your car off, wait 2 seconds, and then start again

If you have a push-start car, you can disable the steering wheel lock by holding down the lock button on the fob for 15 seconds. When you hear a chime, release the button and press it again. The steering wheel will unlock.

You can also disable the system by disconnecting your battery. This will require a jump start in order to get your car started again once the battery is reconnected.

If the dashboard lights flash, your steering wheel is still locked. So try again until you see that the lights stay on

  • If the dashboard lights flash, your steering wheel is still locked. So try again until you see that the lights stay on.
  • If the dashboard lights flash, your steering wheel is still locked. So try again until you see that the lights stay on.
  • If the dashboard lights flash, your steering wheel is still locked. So try again until you see that the lights stay on.

Try pulling the steering wheel toward you while starting the car

If your car is equipped with push-to-start, there’s a chance that it also has a steering wheel lock. This feature prevents you from starting your car without first pushing the button on the side of the wheel.

The most common way to disable this feature is by pulling the wheel toward you while starting the car. However, some vehicles have alternate methods of disabling it, such as pressing a button on the dash or using an app on your phone.

If none of these methods work and your vehicle doesn’t have an override switch labeled “Steering Wheel Lock,” then you’ll need to take it to a mechanic to have them disable it for you.

Try to put some force on the key to make sure it’s fully inserted into its position

If you have a manual transmission, try pulling up on the gearshift lever and holding it there for 10 seconds. This will usually trigger the same starter disabling mechanism as pushing down on the brake pedal. If you have an automatic transmission, try shifting into neutral and pressing down on the brake pedal for 10 seconds.

If none of these tricks work, you may need to get a new key programmed with all of your vehicle’s settings, which may take several hours in a dealership service bay.

Conclusion

A push-button ignition is an excellent invention and it’s very helpful while you are traveling when your hands are full. With the latest diesel engine, modern cars become more expensive than ever. So having Push button ignitions make easy to start your car and gives safety like remote car starter. However, with this technology there are some problems, such as a steering wheel lock push to start. If any of your readers face this problem then we will suggest them to check with their mechanic who will solve this issue without any problem by fixing the connection or replacing the electronic parts.